First Use; First Cleaning - IKEA LAGAN Manual

First use

Before you start using your product, it is
recommended to do the following in the
following sections.
Electrical Connection
Cable connection to the product:
Cable type and cross section
used/suitable for use in the product:
min.H05VV-FG 3x1,5 mm
For Chile single-phase connection;
Connect the wires as identified below:
• Brown cable = L (Phase)
• Blue cable = N (Neutral)
• Green/yellow cable = (E)
For Colombia double-phase connection
without neutral;
Connect the wires as identified below:
• Black cable = L1
• Red cable = L2
• Green cable = (E)

First cleaning

1. Remove all packaging materials.
2. Remove all accessories from the oven
provided within the product.
3. Turn the product on for 30 minutes
and then, turn it off. This way, residues
2
(Ground)
(Ground)
and layers that may have remained in
the oven during production are burned
and cleaned.
4. When operating the product, select the
highest temperature and the operating
function that all the heaters in your
product operate. See "Oven operating
functions". You can learn how to
operate the oven in the following
section.
5. Wait for the oven to cool.
6. Wipe the surfaces of the product with a
wet cloth or sponge and dry with a
cloth.
Before using the accessories;
Clean the accessories you remove from
the oven with detergent water and a soft
cleaning sponge.
NOTICE The surface might get
damaged by some
detergents or cleaning
materials. Do not use
aggressive detergents,
cleaning powders/creams
or any sharp objects during
cleaning.
NOTICE Smoke and smell may emit
for a couple of hours during
the initial operation. This is
quite normal. Ensure that
the room is well ventilated
to remove the smoke and
smell. Avoid directly
inhaling the smoke and the
smell that emits.
41/EN