Using The Connection Wizard - Hunter Hydrawise HC Installation Manual

Ready controllers
Hide thumbs Also See for Hydrawise HC:
Table of Contents

Advertisement

Controller Touchscreen
Wireless Settings
Status
Connecting to Hydrawise...
Wireless Name
Password

Using the Connection Wizard

From the Home screen, touch the Settings button and then the
Wireless button.
Select your wireless network from the list shown on the controller
display and press the Confirm button on the screen. Enter your
wireless password and press the OK button on the keyboard.
Important:
If your network is not listed, check that the unit is within
wireless range. Make sure you press the OK button after
you've entered your password. Pressing the Home
Back
buttons will not save your changes.
24
Security Type
or
① Touch to change the wireless access point.
② View wireless connection status.
③ Touch to change the wireless security type.
④ Touch to change the wireless password.
When connecting to your wireless network, the Wi-Fi
the bottom right of the controller screen will flash. Connecting
takes about 30 seconds. When successfully connected, the
Wi-Fi
icon will remain solid.
DE Verbindungsassistenten verwenden
Tippen Sie auf dem Startbildschirm auf Settings und
anschließend auf Wireless.
Wählen Sie Ihr Drahtlosnetzwerk aus der Liste im Display des
Steuergeräts und tippen auf Confirm (Bestätigen). Geben Sie Ihr
Kennwort ein und tippen auf OK auf dem Tastenfeld.
! Wichtig: Sollte Ihr Netzwerk nicht in der Liste aufgeführt sein,
überprüfen Sie, ob sich das Gerät innerhalb der Netz-Reichweite
befindet. Denken Sie daran, OK zu tippen, nachdem Sie Ihr
Kennwort eingegeben haben. Durch Tippen auf Home
Back
werden Ihre Änderungen nicht gespeichert.
① Tippen, um WLAN-Zugangspunkt zu ändern.
② Status der WLAN-Verbindung anzeigen.
③ Tippen, um WLAN-Sicherheitstyp zu ändern.
④ Tippen, um WLAN-Kennwort zu ändern.
Wenn Sie sich mit Ihrem Drahtlosnetzwerk verbinden, blinkt
das Wi-Fi-Symbol
unten rechts im Display des Steuergeräts
auf. Der Verbindungsaufbau dauert ca. 30 Sekunden. Ist die
Verbindung erfolgreich hergestellt, hört das Wi-Fi-Symbol
zu blinken und leuchtet konstant.
icon at
oder
auf
hydrawise.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hydrawise hpcHydrawise pro-hc

Table of Contents