Table of Contents
Advertisement
1.2.1.6
Improper use
1.2.2 Definition of responsible persons
1.2.2.1
Operating company
Dangers may arise from the machine when it is used for purposes
other than the one it is intended for.
Any danger caused by improper use is the sole responsibility of the
operating company or driver/operator, the manufacturer cannot be
made liable.
Examples for improper use are:
n
Driving on ground with insufficient load bearing capacity (soft
spots, edges, embankments)
n
Driving on subbases or under conditions, which could be
destroyed by the wheels
n
Fire fighting operations
n
Lifting gear operation; attachment of lifting tackle to dozer
blade/bucket
n
Lifting gear operation; attachment of lifting tackle to dozer
blade/tilt blade
transporting persons, except the machine driver, is prohibited.
starting and operation of the machine in explosive environments
and in underground mining is prohibited.
The operating company is the natural or juridical person who uses
the machine or in who's name the machine is used.
The operating company must make sure that the machine is only
used for the purpose it is intended for and in strict compliance with
the safety regulations mentioned in these operating and mainte-
nance instructions.
The operating company must determine and assess the danger in
its company. It must then take appropriate action to ensure health
and safety at work for its employees and point out any remaining
dangers.
The operating company must determine whether there are special
operational hazards such as a toxic atmosphere or limiting soil
conditions. Such conditions require special, additional measures to
remove or reduce the hazard.
The operating company must make sure that all users read and
understand the information concerning safety.
The operating company is responsible for the planning and profes-
sional execution of regular safety inspections.
BC 672 RB-4 / BC 772 RB-4 / BC 772 RS-4 / BC 772 EB-4
General – Concerning your safety
15
Advertisement
Table of Contents
