General – Concerning your safety
1.2.11.7
After maintenance work
1.2.12
Repair
1.2.13
Signage
Fig. 6
Fig. 7
32
Reassemble all guards and protective devices.
Close all maintenance flaps and maintenance doors again.
Identify a defective machine with a warning sign.
Only operate the machine after it has been repaired.
Repairs must only be performed by an expert/qualified person.
When replacing safety relevant components, only original spare
parts must be used.
Keep stickers and signage in good and legible condition and
comply with their meaning.
Replace damaged and illegible stickers or signage immediately.
Warning sticker - Danger of crushing
Warning sticker - Follow operating instructions
BW 190/202 AD-5 / BW 190/202 ADO-5