5.6
SSS (Service Support System)
5.6.1 Installation
(1) Download SSS (Service Support System) from JS-NET.
(2) As the downloaded file is a Zip file, extract the file on the PC.
(3) SS121_*** folder is created. Double click the SETUP.EXE in the SS121_*** folder.
(4) Follow the instruction to install the SSS.
5.6.2 Start up
(1) Connect the unit and a PC. (For the connection, refer to 4.1.3 JIG connector cable connection.)
(2) Select [Start]-[All Programs]-[Service Support System]-[SSS121 GY-HM100].
(3) Select the COM port, then click [OK].
(4) The SSS main screen appears.
(5) If there is an error in the communication with the unit, a "Communication error" message is displayed at the bottom of the screen
(status bar).
Recheck the connection between the unit and the PC.
1-30 (No.HC044<Rev.001>)