Checking Emergency History With Sss - JVC GY-HM150U Service Manual

5.4

Checking emergency history with SSS

Emergency history can be checked using SSS.
(1) On the SSS main screen, click [Emergency Utility].
(2) Click [Read] on the Emergency Utility screen.
(3) Emergency history is displayed.
5.4.1 Saving emergency history
(1) Click [Save] on the SSS main screen.
(2) Save the file with a proper name in a proper location.
(3) To open the saved file, [OPEN] is clicked.
5.4.2 Deleting emergency history
(1) Click [Erase All] on the Emergency Utility screen to delete
emergency history.
NOTE
• Emergency history is recorded in HISTORY-1 to HISTO-
RY-4 in the occurrence order. After the 5th error, HISTO-
RY-4 is overwritten.
• Emergency history is recorded in the EEPROM data. When
all relevant repair work is completed, delete the ERROR
HISTORY.
5.4.3 Emergency display detail
Emergency detail
V INFO ERROR
(Video management file
error)
→When data recovery is
possible, recovery
screen is displayed.
Press [OK] to execute
the recovery.
If recovery is impossi-
ble, formatting is re-
quired.
MEDIA ERROR
(Media initialization error)
Buffer over flow
• Only the number.
• Can be checked with
SSS (No display on the
unit).
5.4.4 Countermeasure on emergency
If the above emergencies occur, check the SD card or the han-
dling of the SD card.
(1) Check if the SD card terminal is dirty or there is any foreign
material.
(2) After copying the necessary data, format the SD card.
(3) Use recommended SD cards.
(Panasonic, TOSHIBA, or SanDisk)
Using cards other than those specified above may prevent
data from being recorded correctly or result in loss of data.
(4) Do not remove the SD card until card recognition is com-
pleted. (The SD card is not extracted until changing lighting
the access lamp of the card slot.)
(5) While the access lamp is blinking, do not remove the SD
card. Data could be broken.
*If the error is not corrected after checking/replacing
(using normal SD card), or properly handling the SD
card, failure in the main unit is considered.
Cause
(1)During video recording:
•SD card is removed.
•Power is disconnected or interrupt-
ed.
(2)During video editing (Delete/OK
mark/Copy):
•SD card is removed.
•Power is disconnected or interrupt-
ed.
(3)Data failure in the card due to
other cause.
• SD card failure.
• SD card terminal connection fail-
ure.
• Card removal right after insertion.
• Due to fragmentation of the SD
card, writing speed deteriorates.
• Copy the necessary data, then
format the SD card.
(No.HC044<Rev.001>)1-27