The Status Display; Softkey Set Status; Modem Status; Insert Character Status - HP 250 Operating

HP 2622D Personal Workstation
The Status Display
By pressing SHIFT f5, you can display the following information:
1. Softkey Set Status
2. Modem Status
3. Insert Character Status
The last two lines of the screen are reserved for the status
display. Regardless of the setting of the status display, you
have 24 lines of the screen available when softkey labels are
off; when softkey labels are on, you have 21 lines available.
To remove the status display from the screen, press
SHIFT f5
again.
Softkey Set Status
You can see which user-defined softkey status is active at any
given time. The sets are defined as Set 1 (Keys 1-8), Set 2
(9-16), and Set 3 (17-24). When you press the CYCLE key, this
value automatically changes to reflect the new set of active
keys.
Modem Status
The modem status is only meaningful when your workstation is
con nee ted v i a a mod em. Th e s t a t us i s d e fin e d as e i the r
"M
()T)£::
M
ON"
or
"MODEM OFF"
depending on your use of the MODEM key (the
MODEM key is defined in the section on Remote Keys).
Insert Character Status
You can tell whether or not you are in insert mode by looking at
the information displayed in the lower right hand corner of the
Stat us Display. When you press the INSERT key, the information
on the display changes from OFF to ON or vice versa.
3-12
HP 2622D Personal Workstation
The Status Display
By pressing SHIFT f5, you can display the following information:
1. Softkey Set Status
2. Modem Status
3. Insert Character Status
The last two lines of the screen are reserved for the status
display. Regardless of the setting of the status display, you
have 24 lines of the screen available when softkey labels are
off; when softkey labels are on, you have 21 lines available.
To remove the status display from the screen, press
SHIFT f5
again.
Softkey Set Status
You can see which user-defined softkey status is active at any
given time. The sets are defined as Set 1 (Keys 1-8), Set 2
(9-16), and Set 3 (17-24). When you press the CYCLE key, this
value automatically changes to reflect the new set of active
keys.
Modem Status
The modem status is only meaningful when your workstation is
con nee ted v i a a mod em. Th e s t a t us i s d e fin e d as e i the r
"M
()T)£::
M
ON"
or
"MODEM OFF"
depending on your use of the MODEM key (the
MODEM key is defined in the section on Remote Keys).
Insert Character Status
You can tell whether or not you are in insert mode by looking at
the information displayed in the lower right hand corner of the
Stat us Display. When you press the INSERT key, the information
on the display changes from OFF to ON or vice versa.
3-12