Plotter Test - HP 250 Operating

Plotter Test
In Case of Difficulty
Press the PLOTTER
connected to your
test appears
TEST softkey to
HP 250 system.
RUH "GPLCn"
select and verify any plotters
The initial menu describing the
HP 250 PLOTTER/SYSTEM COHF I DEHCE TEST
Introduction
Objectives of this test:
1. Verify that a graphic5 plotter is properly connected
and configured to your HP 250 Computer System.
2. Verify that required plotter functions are working.
You should:
1. Turn on your plotter and load clean
paper.
2. Follow the rest of the instructions in this program.
3. Exami ne the plot and compare wi th the picture in
the manua 1 OPERAT I HG THE HP 250.
Please be sure that no picture detail is missing.
If the picture is incorrect. see OPERATING THE HP 250
for further in5truction5.
PreS5 CONTINUE when your plotter is ready.
COHT I HUE
EX IT
PROGRAM
DDDDDDDD
Press the CONTINUE softkey.
The screen appears as follows
10-15
Plotter Test
In Case of Difficulty
Press the PLOTTER
connected to your
test appears
TEST softkey to
HP 250 system.
RUH "GPLCn"
select and verify any plotters
The initial menu describing the
HP 250 PLOTTER/SYSTEM COHF I DEHCE TEST
Introduction
Objectives of this test:
1. Verify that a graphic5 plotter is properly connected
and configured to your HP 250 Computer System.
2. Verify that required plotter functions are working.
You should:
1. Turn on your plotter and load clean
paper.
2. Follow the rest of the instructions in this program.
3. Exami ne the plot and compare wi th the picture in
the manua 1 OPERAT I HG THE HP 250.
Please be sure that no picture detail is missing.
If the picture is incorrect. see OPERATING THE HP 250
for further in5truction5.
PreS5 CONTINUE when your plotter is ready.
COHT I HUE
EX IT
PROGRAM
DDDDDDDD
Press the CONTINUE softkey.
The screen appears as follows
10-15