Data Entry Pad - HP 250 Operating

(~I"J.
HP 2622D Personal Workstation
The TAB key moves the cursor to the first character
position of the next input field or tabbed position. If
you press SHIFT
0 '
the cursor will be moved to the
first character of the previous input field or to the
previous tabbed position.
The CONTROL key is used to access special characters and
commands as shown throughout this chapter.
The CYCLE key is used to access all 24 user-defined
softkeys. This key is discussed in the section on
softkeys, which appears later in this chapter.
Data Entry Pad
Use this block of keys, located on the far right side of the
keyboard to input numeric data rapidly.
[J
Another ENTER key is conveniently placed on the side of
the data entry pad.
Above the ENTER key of the data entry pad is the MINUS
key. The MINUS key usually enters a negative sign when
pressed. For example, if you perform this series of
keystrokes:
800
then you have entered
-5. The MINUS key can also be configured to serve as an
additional TAB key; see "Setting the HP 2622D
Configuration".
& [ ]
(]~~
$
*
A
c:J~~
/ @l #
D(]~
>
[ 0
JO
Data Entry Pad
3-5
(~I"J.
HP 2622D Personal Workstation
The TAB key moves the cursor to the first character
position of the next input field or tabbed position. If
you press SHIFT
0 '
the cursor will be moved to the
first character of the previous input field or to the
previous tabbed position.
The CONTROL key is used to access special characters and
commands as shown throughout this chapter.
The CYCLE key is used to access all 24 user-defined
softkeys. This key is discussed in the section on
softkeys, which appears later in this chapter.
Data Entry Pad
Use this block of keys, located on the far right side of the
keyboard to input numeric data rapidly.
[J
Another ENTER key is conveniently placed on the side of
the data entry pad.
Above the ENTER key of the data entry pad is the MINUS
key. The MINUS key usually enters a negative sign when
pressed. For example, if you perform this series of
keystrokes:
800
then you have entered
-5. The MINUS key can also be configured to serve as an
additional TAB key; see "Setting the HP 2622D
Configuration".
& [ ]
(]~~
$
*
A
c:J~~
/ @l #
D(]~
>
[ 0
JO
Data Entry Pad
3-5