Table of Contents
Advertisement
3 Insert both sides of core wire of the power cable into the
connection sleeve.
•
Method 1: Push the core wire into the sleeve from
both sides.
•
Method 2: Twist the wire cores together and push it
into the sleeve.
Method 1
Connection sleeve
4 Using a crimping tool, compress the two points and flip
it over and compress another two points in the same
location.
•
The compression dimension should be 8.0.
•
After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
Method 1
Compress it 4 times.
5 mm
5 Apply heat to the contraction tube to contract it.
Method 1
Contraction tube
6 Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Three or more layers of insulation are required.
Method 2
Connection sleeve
Compression
dimension
Method 2
Compress it 4 times.
5 mm
Method 2
Contraction tube
Method 1
Insulation tape
40 mm
7 After tube contraction work is completed, wrap it with
the insulation tape to finish.
Method 1
IInsulation tape
CAUTION
•
Make sure that the connection parts are not exposed to
outside.
•
Be sure to use insulation tape and a contraction tube
made of approved reinforced insulating materials that
have the same level of withstand voltage with the power
cable. (Comply with the local regulations on extensions.)
WARNING
•
In case of extending the electric wire, please DO NOT use
a round-shaped Pressing socket.
– Incomplete wire connections can cause electric shock
or a fire.
Method 2
Insulation tape
35 mm
Method 2
Insulation tape
15
English
Advertisement
Table of Contents
