Testing The Expresskeys; Testing The Tablet Touch Strips - Wacom Intuos3 12x19 User Manual

Testing the ExpressKeys

1. With the D
IAGNOSTICS
If you have more than one tablet connected to your system, be sure to select the tablet in the T
I column.
NFO
2. Test the keys on your tablet by clicking them one at a time. Each time you press a key, its number will be
displayed next to either the L
testing.
When you are done, click on the C

Testing the tablet Touch Strips

1. With the D
IAGNOSTICS
Strip(s). If you have more than one tablet connected to your system, be sure to select the tablet in the
T I column.
ABLET NFO
2. First, slide your finger up or down along the entire length of the Touch Strip you want to test. As you
touch and move your finger along the Touch Strip, a number will indicate the current finger position for
the respective Touch Strip next to L
3. Next, slide the pen tip up or down along the Touch Strip edge closest to the tablet's active area. As you
move the tool tip along this area of operability, a number will indicate the current pen position for the
respective Touch Strip next to L
4. When you are done, click on the C
C
ONTENTS
dialog box open, observe the T
K or R
EFT EYS IGHT
button to exit the dialog box.
LOSE
dialog box open, observe the T
T
EFT OUCH
T S
EFT OUCH TRIP
button to exit the dialog box.
LOSE
C
ONTENTS
I
NDEX
I column as you test the ExpressKeys.
ABLET NFO
K category, depending on which keys group you are
EYS
I column as you test the tablet Touch
ABLET NFO
S or R T
TRIP IGHT OUCH
or R T S
IGHT OUCH TRIP
I
NDEX
T
ROUBLESHOOTING
S .
TRIP
.
58
ABLET
58