Procedure 11 - Q-Lock Folding System - Sunrise Medical RGK OCTANE FX User Manual

OctaneFX User Manual |

Procedure 11 - Q-Lock Folding System

WARNING:
Your folding back and folding front tube section
MUST be locked securely in place before using your
wheelchair.
11.1: Folding your backrest with Q-Lock system
Rotate the twistlock into the open position, Fig 33.
Press the catch down and push the backrest down. To
engage, pull the backrest up until the catch engages
and then rotate the twistlock into the locked position,
Fig 34.
Fig 33.
Fig 34.
256935 Rev. B
Procedure 11
11.2: Folding the front section with Q-Lock system
Remove rear wheels and rotate the twistlock collars to
the open position. Then depress both Q lock levers down,
this allows the front folding tube section to fold under the
chair. To reposition the footrest simply pull the front section
forward allowing the Q lock levers to click into position.
Once the Q lock leavers have clicked into position, rotate the
twistlock collars into the locked position.
11.3: Adjusting the Q-Lock
Behind the Q-Lock is a grub screw which can be used to
tighten or loosen the Q-Lock joint. Use a 3mm allen key from
the tool kit to adjust. Only adjust if the front frame feels loose
or the catch does not engage.
CAUTION:
This product contains moving parts. Beware of fi nger
trapping.
WARNING:
The twistlocks must be in the locked position
whenever in use. Failure to do so could deactivate
the catches and prevent the frame from closing in,
causing serious injury and equipment damage.
WARNING:
Always check the Q-Lock joint is secure and all
fasteners are tight. There should be no excessive
free play in the QLock joint during use. Make any
necessary adjustments before use.
17