Sunrise Medical R-Net BLUETOOTH Manual

Guide to R-Net BLUETOOTH Please see the Disclaimer information ProviDeD on the last Page of this Document

Enable Bluetooth Feature

1.
Enter the User Settings Menu
a) Omni2 : Press and hold the Top Right Softkey
b) CJSM2: Press and hold the Top Left Softkey
2.
Scroll down to Bluetooth and give a right command to enter the Menu
3.
Set one or more of the available devices to ON
4. For the Omni2 and CJSM2, scroll to the exit option at the bottom of the list.
5.
Power the unit off and back on for your changes to take effect

Entering Discovery Mode

Once Bluetooth has been enabled, entering Discovery Mode
on the device is done in the same way whether you are using a
Bluetooth Module or the CJSM2 or Omni2 with built-in Bluetooth.
1. Turn the chair on and enter the Bluetooth Mode. Select the device you wish to pair with.
2.
Deflect the joystick (or Omni2's input device) forward and hold until you hear a beep, then
release. This will take approximately 10 seconds.
3.
Deflect the joystick or input device in reverse and hold until you hear a beep, then release.
This will take approximately 10 seconds.
4.
You are now in theDiscovery Mode. A flashing blue icon will confirm this if you are using
the CJSM2 or Omni2. If using a Bluetooth module, the blue light on the top of the module
will begin to blink.
CJSM2
®
Power Button
Profile Button
-
Button
Omni2
Settings Button
LCD Screen
Mode Button
Button
Navigational Button
(Page 1 of 3)