Tools Needed:
8" or 10"
Pipe wrench
TORX T20
Security
†
screwdriver or bit
Level
Caulk gun and caulk
(for installing new exhaust vent)
Flashlight (optional)
Parts Supplied:
Foot boots (4)
■
Leveling legs (4)
■
PN/PR models: Card reader bezel, hardware
■
NOTE: The circuit diagram for this dryer is located inside the side panel, within the Tech Sheets.
Technical Specifications:
220–240 V, 50 HZ 4575 W
Total mass: 69 kg maximum
SPECIFICATIONS
These units are sold in multiple regions with different requirements for
measuring capacity. Below are a few of the valid forms of measure posted
on this product:
Dry Linen Capacity: A weight measure that reflects a minimum threshold for
dry volume capacity that is needed for import tariff purposes.
IEC Capacity: The capacity measure that represents the maximum capacity
of dry linens and textiles which the manufacturer declares can be treated in a
specific cycle.
†ORX and T20 are trademarks of Acument Intellectual Properties, LLC.
6
8" or 10"
Adjustable wrench
that opens to 1"
1" Hex-head
socket wrench
Utility knife
Vent clamps
1" Open-end
wrenches
Flat-blade screwdriver
5/16" Socket wrench
1/4" Nut driver
Pipe-joint compound
suitable for gas type
Ruler or measuring tape
Dry Linen Capacity
10.5 kg (23 lbs)
IEC Capacity
10.5 kg (23 lbs)
Sound Level
LpA: 58 dB(A) {kPa+/-10 dB(A)}
TOOLS & PARTS
Phillips screwdriver
Pliers
(that open to 1
/
")
9
16
Locking pliers
27" Wood block
Putty knife