Complete Installation - Maytag MDE28PD Installation Instructions Manual

COMPLETE INSTALLATION

WARNING
Electrical Shock Hazard
This is a 3-wire appliance which must be earthed.
Securely tighten all electrical connections.
Failure to follow these instructions could result in death,
fire, or electric shock.
1. Check the electrical requirements. Be sure that you have
the correct electrical supply and the recommended earthing
method. See "Electrical Requirements."
2. Check that all parts are now installed. If there is an extra part,
go back through the steps.
3. Check that you have all of your tools.
4. Dispose of/recycle all packaging materials.
5. Switch on power supply.
6. Check dryer operation. Using a full heat cycle, let the dryer
run for at least five minutes. Dryer will stop when time is
used up.
7. Do not earth to a gas pipe
NOTE: Dryer door must be closed for dryer to operate.
When door is open, dryer stops, but timer continues to run.
To restart dryer, close door and press cycle keypad.
15