Bumper Bar; Parking Brake - Chicco SEETY Manual

• 2 front wheels
Important Note: the pictures and instructions contained in
this booklet refer to a specific version of the stroller.
STROLLER FIRST ASSEMBLY
WARNING: When unfolding and folding this product,
make sure that your child or other children are at a safe
distance. Make sure that during these operations the mov-
ing parts of the stroller do not come into contact with your
child.
1. The stroller is delivered closed. Open the closure device
(Fig. 1); then take hold of the handle and front tube and
rotate until a click confirms that the stroller has opened
completely. To open the handle, press the central button
positioned on it and adjust it according to your height
(Fig. 1A).
2. Fit the front wheel into the appropriate hole in the frame
until you hear a locking click (Fig. 2). Repeat the same op-
eration for the other front wheel.
3. To assemble the rear wheels insert the wheel pin in the
rear leg tube (fig. 3). Repeat the same operation for the
other wheel.
WARNING: Before using the stroller, make sure that the
wheels are firmly attached to the structure by gently pull-
ing them outwards.
4. To remove the front wheels, use a sharp object to exert
pressure on the appropriate slot, which is located on the
front part of the frame (Fig. 4). To remove the rear wheels,
press the indicated release button near the rear wheels in
the same way (Fig. 4A).
STROLLER SAFETY HARNESS
5. The stroller is equipped with a restraint system with five
anchoring points, consisting of two shoulder straps with
related adjusting holes, two waist belts and a crotch strap
with buckle, already assembled.
On the backrest there are two pairs of slots for adapting the
height of the shoulder straps to the size of the child (Fig. 5).
WARNING: For use with children from birth to about 6
months the shoulder straps must be inserted in the lowest
slots (Fig. 5A); it may be necessary to reduce the length of
the straps so that they fit the size of the child.
WARNING: To adapt the belts to the body of the child, use
the shoulder straps, passing them through the two regula-
tion holes (Fig. 5).
After placing the child in the stroller, fasten the straps by
first passing the two prongs (Fig. 5B no. 1) through the slots
on the shoulder straps. Then insert the prongs (Fig. 5B no.
1) in the two components of the waist straps (Fig. 5B no.
2) and insert the latter on the sides of the circular crotch
strap buckle (Fig. 5B no.3); adjust the length of the straps,
ensuring that they adhere to the child's shoulders and waist
correctly.
To unfasten the waist belt press the central button on the
crotch strap buckle (Fig. 5B no. 3).
WARNING: To ensure the safety of your child, you must use
the crotch strap, waist belt and shoulder straps at the same
time.
KIT COMFORT
6. The Comfort Kit comprises 2 padded shoulder straps and
a padded crotch strap (Fig. 6).
Insert the shoulder straps in the padding and insert the cir-
cular buckle in the padded crotch strap.

BUMPER BAR

7. The seat features a bumper bar. To attach the bar, insert it
in the relevant slots near the joint (Fig. 7) and check that
the bar is firmly in place by pulling it towards you. To pull
out the bumper bar, press the two external buttons on
the sides (Fig. 7A) and pull it out. The bumper bar can be
used both forward facing and parent facing.
WARNING: Always fasten your child with the safety har-
nesses. The bar IS NOT a device for containing your child.
WARNING: Never use the bumper bar to lift the product
with your child sitting in it.
FITTING THE SEAT ON THE STROLLER
8. To attach the stroller seat to the frame, insert the seat into
the appropriate plastic connection points until you hear
the locking click (Fig. 8).
To facilitate the operation, there are guidance slots on the
sides of the seat indicating proper alignment. The seat can
be assembled both forward facing (fig. 8) and parent facing
(fig. 8A).
WARNING: Before using, make sure that the seat is proper-
ly locked on by pulling it upwards.
To release the seat press the buttons located on the seat
joints simultaneously and pull up (Fig. 8B).
WARNING: Do not attach/remove the seat when your
child is sitting in it.
ADJUSTING THE BACKREST
The backrest can be adjusted to different positions.
The inclination of the backrest is adjustable with a belt.
9. To lower the backrest, use the rear adjustment system
pulling the lever down (Fig. 9) and adjusting the position
until the desired inclination is reached.
Conversely, to raise the backrest, you will need to pull
on the strap (Fig. 9A) until the desired position has been
achieved.
WARNING: The child's weight can make these operations
more difficult.
HOW TO ADJUST THE LEGREST
10. The legrest has two positions. To adjust it, use the but-
tons on the sides of the legrest simultaneously (Fig. 10).
CANOPY
11. The stroller is equipped with a sun canopy and wind-
shield that can be adjusted to various positions.
To adjust the hood, pull and/or push it centrally (Fig. 11). By
lifting the fabric flap in the rear part of the hood, it is possi-
ble to access the mesh section, in order to watch your child.

PARKING BRAKE

12. The parking brake acts on both stroller's rear wheels at
the same time.
To activate the brake press down on the lever (Fig. 12). To
release the brake press up on the same lever (Fig. 12A).
WARNING: Always apply the brakes whenever the stroller is
stopped. Never leave the stroller on a sloped surface, with a
child inside, even with the parking brakes engaged.
WARNING: After operating the brake lever, ensure that
the brakes are correctly engaged in both of the rear wheel
units.
13