To Play A Laser Disc - Sony MDP-600 Operating Instructions Manual

To Play a Laser Disc
This section shows you how to conduct all the procedures associated with playing LOs.
How to Load and Play an LD (Laser Disc)
After you have connected the Multi Disc Player to the TV and/or stereo system, you can begin playing a laser disc.
Locate the POWER, OPEN/CLOSE, and PLAY buttons on the Remote Commander or the front panel of the player.
Do not transport the player while playing a disc as it may cause damage to the disc.
1 Turn on the multi disc Press the POWER button on the player or
player.
=)
2, POWER
Remote commander.
(Player) om
2 Turn on the TV and stereo TV. Set the input selector on the TV to "Video".
system.
Stereo System. Turn on the ampiiier or
receiver and select CD or AUX for audio output.
3 Open the disc tray. OPENCLOSE OPENICLOSE Press the OPEN/CLOSE ( 4 ) button.
The front cover of the player slides down and the
disc tray comes out.
(Player) (Remote) o
Carefully center a singte disc on the tray. If you
insert more than one disc, or if the disc is not
seated property, it may not play or it may damage
the disc.
What ts this indication?
Ni cl tae
Side as This indication appears in the front panel display
when the tray ts empty.
4 Place a disc on the tray.
§ Start playback. Ce) Press the PLAY (> } button.**
The disc tray closes and the upper side of the disc
(Player) (Remote) starts playing.
To Advance or Reverse........... (<<) (Lee) = Hold down the SCAN (<4 ) button on the
P player or rotate the Shuttle Ring on the Remote.
aga eae
'Gy
(Remote)
ACS/AMS
To Advance or Go Back (ice) (eet) Press the ACS/AMS (4-4/1) button.
a Chapter ata Time .............. ee OP
* The player determines that the upper side of the disc is side "A," and the other side is "B." regardless of the label "A" or
"8 printed on the disc.
** When playback of the upper side of the disc (side A) ends, the other side (side 8) starts playing automatically. If nothing
is recorded on side B, playback stops.