Table of Contents
Advertisement
if Your TV Does Not Have Audio/Video Inputs (MOP-A1 only)
For connection, use the optional RFU-90UC (RFU adaptor).
The audio signal of the disc is reproduced in monoaural when connected to the TV via the RFU-S90UC. To enjoy the disc
in stereo, connect the player
to an audio system (page 13).
CTTCTERLT TL
UCU CCTF ET
se
RK-C310/315
Audio Cable
{not suppked)
sade
VS BFu-souc
(not supplied)
a
=
ay ay
Note on Connection:
One of the most important of your Multi Disc Player is its digital stereo sound (from either LD's or CD's). To get the
advantage of stereo sound, hook your player's L/R audio outputs to a stereo audio system or stereo TV. In addition, by
using the video output jack, you will get a noticeably better picture. To connect this player to a TV without A/V inputs, use
an RFU-90UC adaptor (not supplied). However, if you connect your Player this way, you will not get stereo sound, and
the picture quality will not be as good as it could be.
* Why is it necessary
to select 3 or 47
The Multi Disc Player sends its output to the TV as a VHF broadcast signal. Selection an unused channel avoids
interfering with regular broadcasts. When watching regular TV programs, tum the player off or press the DISC/TV
button on the Remote Commander so that you can obiain a better picture. If TV picture quality is not satisfactory, reler
to the manufacturer's manual and adjust the reception.
When watching TV broadcast.
Always
tum off the Multi Disc Player to get better reception.
During
FM or AM reception
Turn off the power
of the Multi Disc Player to prevent the possibility of noise interference.
Advertisement
Table of Contents
