The Disc Does Not Play Back; Mp3/Wma Files Cannot Be Played Back; Ipd Stop; No Dev (No Device) - Sony CDX-G2050UI Operating Instructions Manual

Fm/mw/sw compact disc player
Hide thumbs Also See for CDX-G2050UI:
Table of Contents

Advertisement

CD playback

The disc does not play back.

 Defective or dirty disc.
 The CD-R/CD-RW is not for audio use
(page 13).

MP3/WMA files cannot be played back.

 The disc is incompatible with the MP3/WMA
format and version. For details on playable
discs and formats, visit the support site.
MP3/WMA files take longer to play back than
others.
 The following discs take a longer time to start
playback.
 A disc recorded with a complicated tree
structure.
 A disc recorded in Multi Session.
 A disc to which data can be added.
The sound skips.
 Defective or dirty disc.

USB playback

You cannot play back items via a USB hub.
 This unit cannot recognize USB devices via a
USB hub.
A USB device takes longer to play back.
 The USB device contains files with a
complicated tree structure.
The sound is intermittent.
 The sound may be intermittent at a high-bit-
rate of more than 320 kbps.
Error displays/Messages
ERROR
 The disc is dirty or inserted upside down.
 Clean or insert the disc correctly.
 A blank disc has been inserted.
 The disc cannot play due to a problem.
 Insert another disc.
 USB device was not automatically recognized.
 Connect it again.
 Press  to remove the disc.
HUB NO SUPRT (hubs not supported)
 USB hub is not supported on this unit.

IPD STOP

 When repeat play is not set, playback of the
last track in album finished.
The music application in the iPod/iPhone is
terminated.
 Press PAUSE to start playback again.

NO DEV (no device)

 [USB] is selected as source without a USB
device connected. A USB device or a USB
cable has been disconnected during
playback.
 Be sure to connect a USB device and USB
cable.
NO MUSIC
 The disc or USB device does not contain a
music file.
 Insert a music CD.
 Connect a USB device with a music file in it.
OVERLOAD
 USB device is overloaded.
 Disconnect the USB device, then change
the source by pressing SRC.
 The USB device has a fault, or an
unsupported device is connected.
PUSH EJT (push eject)
 The disc cannot be ejected.
 Press  (eject).
READ
 The unit is reading all track and album
information on the disc.
 Wait until reading is complete and
playback starts automatically. Depending
on the disc structure, it may take more than
a minute.
USB NO SUPRT (USB not supported)
 The connected USB device is not supported.
 For details on the compatibility of your USB
device, visit the support site.
[
] or [
 During reverse or fast-forward, you have
reached the beginning or the end of the disc
and you cannot go any further.
[
]
 The character cannot be displayed.
]
17
GB

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents