Table of Contents
Advertisement
To Select the Disc Side .........
-s:
CISC SIDE
Press (DISC) SIDE A to play the upper side of the
> | (x) (5 jaisc trom the beginning.
(Player)
(Remote)
(Player)
(Remote)
STOP
To Stop Playback ...............
Ca)
(Player or Remote)
OPENCLOSE
OPENCLOSE
Press (DISC) SIDE B to play the other side of the
disc from the beginning.*
Press PAUSE (@#). The sound mutes, and the
picture freezes when playing a CAV disc.** To
resume playback, press PAUSE (18) or PLAY
(>).
Press STOP (8 ).
Topiay again from the beginning of the disc, press
PLAY (P ).
To Stop Play and Remove the
(a | (g_} Press OPEN/CLOSE (2). Remove thediscand
To Have the Player Pause
Before Starting ..................
(Player)
(Remote)
To Get Sharp/Soft Image .......
PICTURE ENHANCE
Co
(Remote)
* When playback
of side 8 ends, the player stops playing.
** When playing
a CLV disc, the TV screen goes blank.
press & again to close the empty tray.
Press PAUSE (it) after doing step 4 on page
14,
The tray closes and the player waits at the start
of the disc until you press PLAY ( » } or PAUSE
( @ ). If you want to play side B, press (DISC)
SIDE B, then PAUSE ( @ ).
Press PICTURE ENHANCE on the Remote to
select the mode. The selected mode appears
on the TV screen (lower left-hand comer) for
three seconds. Each time you press this button
the mode changes in the order of STANDARD,
SHARP and SOFT.
SOFT: Soft picture
Reduces screen noise
STANDARD: Standard picture
SHARP: Sharp picture
Refines the images
Even if you turn off the power, the mode will
remain stored in the player's memory. If you
unplug the power cord, the mode will return to
STANDARD.
Ta
Blasi at arene Pina
¢
Advertisement
Table of Contents
