Philips FW-C70 Manual page 13

13
Selecting the Source
• Press the respective source selection
button: CD, TUNER, TAPE or
AUX.
™ The display indicates the selected
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the
AUX IN terminals.
Selecting the Equalizer
Display
You can select the desired equalizer
display for the system. You must not
press the DSC button on the system
before using the SOUND 3 or 4
controls.
• Press the SOUND 3 or 4 to select
the desired Equalizer Display,
NORMAL, TOP DOWN, or NITE
MODE.
™ The selected display will be
shown.
NORMAL Display
PROGRAM STEREO
BACK
REPEAT TIMER REC
NEWS T.A. AM MW FM LW FRONT HSD
60Hz 250Hz 500Hz 4KHz 8KHz
1KHz 2KHz
pg 01-28/C50-C70/37-Eng 13
OPERATING THE SYSTEM
TOP DOWN Display DIGITAL SOUND CONTROL
(DSC)
PROGRAM STEREO
The DSC feature enables you to adjust
REPEAT TIMER REC BACK
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
the system to suit your type of music.
• Press DIGITAL SOUND
CONTROL (DSC) to select
OPTIMAL, CLASSIC, TECHNO,
NITE MODE Display
JAZZ, ROCK or VOCAL.
™ The selected digital sound is
PROGRAM STEREO
REPEAT TIMER REC BACK
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz encircled.
1KHz
™ "OPTIMAL X, CLASSIC,
TECHNO X, JAZZ X, ROCK
X or VOCAL X" will be
Note:
displayed. "X" is the pre-selected
– In NITE MODE, all lights will be
level.
switched off and the display brightness
will be dimmed.
With the SOUND 3 or 4 controls,
you can change the level of any DSC
Sound Control
setting except CLASSIC.
VOLUME ADJUSTMENT
• First select the DSC feature, then
Adjust VOLUME to increase or press the SOUND 3 or 4 until the
decrease the sound level.
desired digital sound setting level is
reached.
For Personal Listening
™ The digital sound setting level will
Connect the headphones plug to the
increase or decrease between
n socket at the front of the system.
level 1 and 5.
The speakers will be muted.
Note:
– For neutral setting, select CLASSIC and
switch off DBB.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to
enhance the bass response.
Get other manuals https://www.bkmanuals.com
• Press DBB briefly to select a bass
boost level.
™ The respective DBB level is being
encircled and lit.
™ "BEAT", "PUNCH" or "BLAST"
will be displayed.
To switch off DBB
• Press DBB briefly until "DBB OFF"
is displayed.
Note:
– Some CDs or tapes might be recorded
in high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
Automatic DSC-DBB selection
The best DBB setting is generated
automatically for each DSC selection. You
can manually select the DBB setting that
best suits your listening environment.
MUTE (on remote control only)
This feature allows you to temporarily
switch off the sound without switching
off the system when you require a
moment of silence.
• Press MUTE on the remote control
to switch off the sound.
™ "MUTE" will be displayed.
• Press MUTE again on the remote
control or increase the VOLUME
level to switch on the sound.
3139 116 19441 (ENG)
18/11/1999, 2:39 PM