Philips FW-C70 Manual page 9

9
A AM Loop Antenna
Connection
Connect the supplied loop antenna to
the AM ANTENNA terminal. Place the
AM loop antenna far away from the
system and adjust its position for the
best reception.
D Rear Surround
B FM Wire Antenna
Connect the black (non-marked) wires
Connection
to the black REAR SURROUND
terminals and the colored (marked)
Connect the supplied FM wire antenna
to the FM ANTENNA 300 Ω terminal.
wires to the grey REAR SURROUND
Adjust the position of the FM antenna terminals.
for the best reception.
E Subwoofer Out
Outdoor Antenna
For better FM stereo reception,
connect an outdoor FM antenna to the
Connect the optional active subwoofer
FM ANTENNA 300 Ω terminal using a
to the SUBWOOFER OUT terminal.
300 Ω dipole wire.
The subwoofer reproduces just the low
bass sound effect (e.g. explosions, the
C Speakers Connection
rumble of spaceships, etc.). Be sure to
follow the instructions supplied with the
• Connect the right speaker to Front
subwoofer.
terminal R, with the colored wire to
+ and the black wire to -.
• Connect the left speaker to Front
terminal L, with the colored wire to
+ and the black wire to -.
• Clip the stripped portion of the
speaker wire as shown.
pg 01-28/C50-C70/37-Eng 9
PREPARATION
F Connecting other
12 mm
equipment to your
system
You can connect the audio left and right
unlock lock
OUT terminals of a TV, VCR, Laser Disc
player, DVD player or CD Recorder to
the AUX IN terminals at the rear of the
system.
Speakers' Connection
G AC Power Supply
After all other connections have been
made, connect the AC power cord to
the system and to the wall outlet.
Connection
Get other manuals https://www.bkmanuals.com
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or
AA) into the remote control as
shown in the battery compartment.
• To avoid damage from possible
battery leakage, remove dead
batteries or batteries that will not be
used for a long time. For
replacement, use type R06 or AA
batteries.
Notes for remote control:
– First select the source you wish
to control by pressing one of the
source select keys on the remote
control (e.g. CD or TUNER).
– Then select the desired function
( É , í , ë , etc.).
3139 116 19441 (ENG)
18/11/1999, 2:38 PM