Philips FW-C70 Manual page 25

Hide thumbs Also See for FW-C70:
Table of Contents

Advertisement

25
Tape Deck Operation
Recording or playback cannot be
made or there is a decrease in
audio level.
• Dirty tape heads, capstans or
pressure rollers.
™ See section on tape deck maintenance
(page 24).
• Magnetic build-up in the record/
playback head.
™ Use demagnetizing tape.
General
System does not react when any
button is pressed.
• Electrostatic discharge.
™ Press STANDBY ON to switch the
system off. Remove the AC power plug
from the wall outlet, then reconnect
the power plug and switch on the
system again.
No or poor sound.
• Volume is not turned up.
™ Adjust VOLUME.
• The headphones are connected.
™ Disconnect the headphones.
• Speakers are not connected or are
connected wrongly.
™ Check that the speakers are
connected correctly.
™ Make sure the stripped speaker wire is
clamped.
pg 01-28/C50-C70/37-Eng
25
TROUBLESHOOTING
Reversed left and right sound.
Clock setting is erased.
• Speakers are connected wrongly.
• There was a power failure.
™ Check the speaker connections and
™ Reset the clock.
location.
System displays features
Lack of bass sound or apparently
automatically; buttons flash
imprecise physical location of
continuously.
musical instruments.
• Demonstration mode is switched
• Speakers are connected wrongly.
on.
™ Press and hold Ç (on the system) for
™ Check the speaker connection for
proper phasing, colored/black wires to
five seconds to switch off the
colored/black terminals.
demonstration.
Remote control has no effect on
All lighted buttons are not lit.
the system.
• Equalizer Display is in NITE mode.
™ Press SOUND 3 or 4 to select other
• Wrong source is selected.
™ Select the source (CD, TUNER, etc.)
Equalizer Display.
before pressing the function button,
( É , í , ë , etc.).
• The distance to the system is too
large.
™ Reduce the distance.
• Batteries are inserted incorrectly.
™ Insert the batteries with their polarities
(+/– signs) as indicated.
• Batteries are exhausted.
™ Replace the batteries.
Timer is not working.
• Clock is not set.
™ Set the clock.
• Timer is not switched on.
™ Press CLOCK/TIMER to switch on the
timer.
• Recording is in progress.
™ Stop recording.
Get other manuals https://www.bkmanuals.com
3139 116 19441 (ENG)
18/11/1999, 2:39 PM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fw-c50

Table of Contents