KitchenAid Superba 4KUDS220T Use And Care Manual page 25

OPTION B
Upper Panel:
1. Disconnect electrical power supply.
2. Pull door open. Remove the two screws
(A) on each side of the dishwasher door
that secure the upper panel assembly.
3. Close door while holding upper panel in
place. Pull out lower edge of panel until
top edge of panel drops down.
4. Place panel assembly on a smooth, flat
surface and remove three screws (B) from
either side of panel to remove the trim
strip (C).
5. Slide the colour panel out. Handle carefully
so the panel will not be scratched or
bent. Turn the panel to the desired
colour. Place the colour panel in position
then push the filler panel in behind it.
6. Replace the trim strip and the three
screws.
7. With hands placed at sides of panel, slide
the top edge of the panel up into position
under the control panel (see illustration to
the right).
8. Hold the panel in place and open the
door.
9. Hold panel assembly in position with one
hand. Replace the two screws (A) on each
side of the dishwasher door that secure
the panel assembly.
25