Table of Contents
Advertisement
28 Timer Recording
o®®®®®m
moooQQeee®oooooooo®®®®®m
moooQQeee®®ooo®ooo®®®®®m
mooeQQeeeooooooooo®®®®®m
moooQQeee®o®®®®ooo®®®®®m
mOOOQQ_
Follow the steps below to program theVCR of the DVD/VCR to
record TV programs while you're away from home. Before you begin:
¢_Set up the TV channels at the DVD/VCR.
Details are on page 21.
_ Set the clock. Details are on page 22.
_; Put a tape in the cassette compartment
of the DVD/VCR.
Make
sure the tape's record tab is intact and the tape is long enough
to record the program(s).
_ PressVCR
soVCR light appears on the front of the DVD/VCR.
Press DISC/VCR
MENU
so MENU
appears.
Press • or • to selectTIMER
PROGPu_,MMING.
Then, press I_. Program numbers that do not have a timer
recording stored will flash.
TIMER PROGRAMMING
PROG.
DATE
STARTTIME
ENDTIME
CHANNEL
REC SPEED
Press • or • to select an empty program.
Then, press I_.
S
Press •
or • to select ONCE,
DALLY orWEEKLY.
Then, press I_.
÷ ONCE -TheVCR
will record aTV program on any day you
choose, up to 12 months away.
÷ DALLY - TheVCR will record aTV program at the same time
on the same channelevery day, Monday through Friday.
÷ WEEKLY -TheVCR will record aTV program at the sametime
on the samechannelevery week, for example, every Monday.
To enter
the recording
date, press •
or •
until
the
month
appears.Then,
press I_.
Next,
press •
or • until
the day appears.Then,
press I_. The day of the week will appear. You cannot
record more than one year in advance.
To enter the recording's start time, press • or • until the
hour appears. Press I_. Press • or • until the minute
appears. Press I_.Finally,
press • or • to point to AM
or PM. AM or PM will flash beside the start time. Press I_.
Repeat
the procedure
in step 6 to set the
recording's
end time.
Press • or •
until
the channel
number
appears.
Then, press I_.
@ If you are using a standard antenna/Cable TV hookup (as
shown on page 9), select the channel of the TV program
you want to record.
SEARCH MODE
DISP_¥
OOO
RE_T
_£PEAT
AUDD
0@0 "
SUBTILE
ZOOM
ANGLE
S_FP,'_
O00®"
RETURN
T_TLE
_EAR,_ES_
SLOW
©OOO
• You cannot access theTIMER
PROGRAMMING
menu at step
2 if the clock is not set.The
CLOCK
SET menu will appear.
Follow the steps on page 22 to
set the clock.
• Only programs that will air
Monday-Friday can be recorded
on a DAILY basis. If you select
DAILY at step 4,then enter a
Saturday or Sunday DATE at step
5, the correct program will not
be recorded.TheVCR
will alter
the recording date and record a
different program than the one
you intended.
• If you are recording from other
equipment, set CHANNEL
to L1
or L2 at step 8. If you connected
the other equipment to the
AUDIO
andVIDEO
In jacks on
the front of the DVD/VCR,
choose L2. If you connected the
equipment to theAUDIO
IN and
VIDEO IN jacks on the bad< of
the DVD/VCR, choose L1.
• Enter the information
while the
space is flashing.
Advertisement
Table of Contents
