Table of Contents
Advertisement
10 Hookups (cont'd)
o®®®®®m
moooQQeeeooooooooo®®®®®e
moeoQQeoe®oooooooo®o®®®m
moooQQeeeooooooooo®®®®®m
moooQQeeeooooooooo®®®®®m
mOOOQQ.
DVD/VCR
to Cable
Box or Satellite
Receiver
and TV
Using only basic RF coaxial
cables
This connection
will let you use the features
of both theVCR
and the DVD
player.
Cable
Signal
Cable Box/Satellite
Receiver
RF coaxial cable
DVD/VCR
RF coaxial cable
TV's ANTENNA
IN Jack
Connections
Connect
a CableTV
or Satellite
signal to the IN
jack on the Cable Box/Satellite
Receiver.
Use an RF coaxial
cable (as the one supplied)
to
connect
the OUT
jack on the Cable Box/Satellite
Receiver
to the ANT-IN
(Antenna
In) jack on the
DVD/VCR.
Use a second RF coaxial
cable to connect
the
ANT-OUT
(Antenna
Out)
jack on the DVD/VCR
to
the TV's Antenna
In jack.
Plug in the power
cord of yourTV.Turn
on theTV
and set it to channel
3 or 4.
Plug in the power
cord of the DVD/VCR.You
are
ready
to turn on the DVD/VCR.
Go to page 16
before
turning
it on.
Remember...
There are two ways to connect your Cable Box/Satellite
Receiver
to the DVD/VCR.With
the connection
on this page:
÷ SelectTV
channels at the Cable Box/Satellite
Receiver, not the
DVD/VCR.To
record or viewTV
channels, follow these steps:
1) PressVCR to put the DVD/VCR
inVCR mode.VCR
light will
appear on the front of the DVD/VCR.
2) Press SKIP I_I/CH A or SKIP I_I/CH v
to set the DVD/VCR
to the Cable Box/Satellite
Receiver output
channel (03 or 04).
3) Set theTV
to the DVD/VCR's
output channel (03 or 04).The
DVD/VCR's
output
channel is channel 3 when the DVD/VCR
is
new.To change it from 3 to 4, press and hold
(VCR) PLAY I_ on the DVD/VCR
for 3-5 seconds during tape
playback. For more details, see step 4 on page 9.
4) Select the channel you want to view/record
at the Cable
Box/Satellite
Receiver.
÷ You may not view a channel other than the one you are recording.
÷ You can only program a timer recording for one channel at a time.
Set your Cable Box/Satellite Receiver to the channel you want to
record.When
you enter the channel you want to record in a
timer recording, select channel 03 or 04 (the Cable Box/Satellite
Receiver output channel). (This is step 8 on page 28.) Leave the
Cable Box/Satellite Receiver on for a timer recording.
• If your Cable Box or Satellite
Receiver has Audio and Video
Out jacks, use audio and video
cables to connect them to the
VCRAUDIO
IN andVIDEO
IN
jacks on the rear of the
DVD/VCR.You
will not need
the RF coaxial cable connection
between the Cable Box/Satellite
Receiver and the DVD/VCR
as
described at step 2.
Advertisement
Table of Contents
