Parkside PLEM 50 A1 Operating Instructions Manual page 60

The corresponding line of the
vidual measurement values.
Directly after the second measurement, the calculated area is shown
on the display
values ,
Volumes
♦ Press the
display
♦ Now measure the length, width and height of the volume to
be measured by pressing the
Single measurements). The corresponding line of the
fl ashes for the individual measurement values.
Directly after the third measurement, the calculated volume is shown
on the display
Simple Pythagoras
Pythagoras' Theorem describes the dependence of the lengths of the
sides in a right-angled triangle as follows: a
b are the legs and c the hypotenuse of the triangle.
Using the "simple Pythagoras" function, it is possible to calculate the
length of one of the legs. This feature is particularly useful for poorly
accessible measurement points.
♦ Press the
the display
♦ Now measure the hypotenuse (largest distance) and one of the
legs (shortest distance to the measurement surface) by pressing
the button
ON
The corresponding line of the
measurement values.
PLEM 50 A1
and the
and the results
button twice. The
FUNC
.
and the
button three times. The
FUNC
.
(see also Chapter Single measurements).
icon fl ashes for the indi-
icon stops fl ashing. The individual
are shown on the display
icon appears on the
button
ON
icon stops fl ashing.
2 + b
icon fl ashes for the individual
.
(see also Chapter
icon
2 = c 2 , where a and
icon appears on
GB
57