Table of Contents
Advertisement
A-19
in paragraph 3-10 change "11.90'' to "15.60," "2.90"
to "2.40" and "25 V" to "20 V."
A-20
In paragraphs 3-11 and 3-36 change "200 W" to
"150 W,"
A-21
in paragraph 3-15, b; 3-28, and 3-121 change "64.5
V" to "54.5 V.
A 22
In paragraph 3-25 change the third sentence to read:
"The approximate trip voltage range is from two volts to 54.5
volts at Remote and 1.7 volts to 54.5 volts at Local.
A-23
In paragraphs 3-28 and 3-117 change "1.04" to "1.05."
A-24
In paragraph 3-28 change "33,2 V." to 33.5 V".
A-25
In paragraph 3-28 and 3-88 change "60 V" to "50 V."
A-26
In paragraph 3-79 change "600" to "500" to "1200"
to "1000," and "30 W" to "25 W."
A-27
In
Figure 3-13,
Programming
syntax,
change
"VOLTAGE" and "SOFT VOLTAGE" to "00.000 to 50,000 V."
A-28
In paragraphs 3-111 and 3-121 change "60.000" to
"50.000."
A-3G
Section IV Manual Changes
A-31
In paragraph 4-28, note that the 0-volt to 5-volt
reference amplifier output given in paragraph 4-74 for the CC
Circuit is attenuated to 0-volt to 4.17-volt for the CV Circuit.
A-32
In paragraph 4-74, the reference illustration is now
Figure A-2 instead of Figure 4-6.
A-33
In paragraph 4-92, note that the input filter charges
to approximately 250 volts dc.
A-34
MAINTENANCE
A-35
Section V Manual Changes
A-36
In paragraphs 5-9; and 5-34 f; change "20," to "1.50."
A-37
In paragraphs 5 9; 5-17, c; 5-34, b,e,f,h; 5-44, e; 5-48,
f; 5-52, b; and 5-127, b; change "20 V" to "15 V."
A-38
In paragraph 5-9 change "180" to "15.60."
A-39
In paragraphs 5-9; 5-29, c; change "3.3 A;; to "3.2 A."
A-40
In paragraphs 5-9; 5-15, c,h; 5-19, e; 5-29, c; 5-38 c;
5-41, c; 5-46, d; 5-129, g,h; 5-132, f; and 5-136, g; change "60
V" to "50 V."
A-41
In paragraph 5-9 change "230 W" to "195 W."
A-42
In paragraph 5-15, d; change "60.0" to "50.0."
A-43
In paragraph 5-15, f; 5-19, g; 5-38, e; 5-41, e; and 5-46,
b; change "33 mV" to "32 mV and "3.3 A" to "3.2 A."
A-44
In paragraph 5-25, c; change "40 V and 5.7 A" to "30
V and 6.5 A."
A-45
in paragraph 5-34, c; change "2.220" to " 1.660."
A-46
In paragraph 5-34, f; change "20.20" to "15.560."
A-47
In paragraph 5-38, j; change "70 mVdc" to "60
mVdc."
A-48
In paragraph 5-41, h; change "21 mVdc" to "18
mVdc,"
A-49
in Table 5-2, under "OVP TEST", numbers 3 and 5,
change "64.5" to "54.5."
A. TYPICAL CV/CC
SUPPIY
DUAL-RANGE CV/CC
SUPPLY
C. MODEL 6034A
AUTORANGING SUPPLY
Figure A-2.
Output Characteristics: Typical, Dual-Range, and Autoranging Supplies
A-3
Advertisement
Table of Contents
