Advertisement
© Record On a Tape
EJ Areonnecioñe aro mada
» VCR power comes on automatically.
(See pages 6-9.)
O] VCR is Plugged in.
O TV is turned on and set to the VCR
channel (CH3 or CH4).
e
` Push CH A/V or
cHo2
NUMBERED
keys to
# | - select a channel.
- e Or, push CHANNEL A/V
on the VCR.
Holding down CH A/W
will increase the channel
search speed.
To record from an outside source, push CH A/¥ or
INPUT to select "LINE1" or "LINE2" (see page 21).
Multi Function
Display
bee
- Push SPEED to change
O
the recording speed.
SLP
e SP = Standard Play
> ---*
LP = Long Play (VHS mode only)
SLP = Super Long Play
(See page 5.)
~~ Push REC/TIME on the remote control
FEMME
or VCR to start recording.
>
« * To edit out unwanted portions, push PAUSE to
-----+
pause the recording in progress.
To release, push PAUSE again.
(After the VCR has been in Pause mode for 5
minutes, it will stop automatically to protect the
tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the stop time as shown.
C Normal Rec —+0:30 —» 1 i
4:00<4— 3:004— 2:00 *— 1:30
* "TIMER" lights in the Multi Function Display.
+ The remaining recording time can be displayed by pushing
DISPLAY in OTR mode.
o
- Push STOP to
| (sto - stop recording.
_ + Or, push STOP/EJECT on the VCR,
20
Advertisement
