Advertisement
To Change On Screen Display Language
1 Push MENU to display the menu.
2 Push AY to select
the language.
English: LANGUAGE
Spanish: IDIOMA
French: LANGUE
3 Push » repeatedly to change the language.
E? English —— Spanish —
French =]
4 Push MENU to exit this mode.
To Add or Delete a Channel
1 Select a channel using the
NUMBERED keys to add
or CH 4/Y to delete.
2 Push ADD/DLT to add or
delete the channel.
» To select a channel once it's
deleted, use the NUMBERED
keys on the remote control,
Deleted channels will flash in the Multi
Function Display on the VCR when selected.
CHANNEL 08 ADDED
CHANNEL 08 DELETED
When Using the 100 key
When selecting CATV channels 100 to 125 with the
NUMBERED keys, first push the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Push NUMBERED keys 100, then 2, then 5.
To Replace Channels in Memory
In case you have cable installed, etc.
I Push MENU to display the menu.
2 Push AY to select "SET UP
CHANNEL," and then push »
to display the "SET UP
CHANNEL" screen.
3 Push AV to select
"ANTENNA SYSTEM," and
then push P to set your
antenna system (TV or CATV).
SELECT:
Y KEY
4 Push AY to select "AUTO
SET
:> KEY
SET," and then push P to
——
SET UP YCA
SET CLOCK
OMA / LANGUE: ENGLISH
SELECT :4 Y KEY
--- SET UP CHANNEL ---
: CATV
AUTO SET
CABLE/DSS BOX SET UP
VCR Plus+ CH SET UP
display the "CHANNEL/CLOCK AUTO SET" screen.
« To exit this mode, push MENU twice.
5 Follow the One Time VCR Setup
instructions on pages 14~16.
« Clock Auto Set will be performed when channels are
replaced in memory. To cancel, push STOP when
"AUTO CLOCK SET PROCEEDING' appears on-screen.
j
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Push MENU to display the menu.
SET UP VCA
ET CLOCK
2 Push AY to select "SET
SET UP CHAN
CLOCK," and then push >
IDIOMA LANGUE: ENGL SH
to display the "SET CLOCK"
screen.
AUTO SET
3 Push AY to select "MANUAL
SET," and then
push »
SELECT:a Y KEY
to display the
SET CLOCK
Bee. eet KEY
screen.
4 Push AV and 4P to select
and set the date, time, and
rT SAT Pal mý
D.S.T. (Daylight Saving Time).
paganan
SELECT: ir y KEY
To Set or Reset Auto Clock Set
Complete the following steps if:
» Auto clock set displayed time was incorrect.
» Auto clock set was not available at first, but has
since become available.
* The PBS channel over which clock data is sent
was changed by the broadcast company.
I Push MENU to display the menu.
2 Push AY to select "SET
SET CLOCKS
CLOCK," and then push »
TO TOMA LANGUE ENGLISH
to display the "SET CLOCK"
screen.
3 Push AV and P to select
et
and set "AUTO SET."
pee a cae
4 Follow the One Time VCR
ËND
:MENU KEY
Setup instructions on pages
14~16.
To setup the VCR in case a cable box or
DSS receiver was installed or replaced
1 Push MENU to display the menu.
2 Push AY to select "SET UP
CHANNEL," and then push >
to display the "SET UP
-- SET UP CHANNEL ---
CHANNEL" screen.
ANTENNA SYSTEM : CATV
ICABLE/OSS
BOX SET UP}
DSS BOX SET UP," and
SELECT: y KEY
then push P to display the
END
MENU KEY
"SELECT HOOKUP' screen.
» To exit this mode,
push MENU three times.
PETER
4 Push AY and
to select and | "PT
set "CABLE/DSS BOXPVCR
> TV," and then continue with
SEL
steps 5~8 on pages 14 and 15. | Eno
SELECT: z : a
MENG KEY
* This VCR will accurately maintain its calendar up to Dec. 31, 2015, 11:59PM.
ÓN
¡NOTES)
+ Normal TV or Cable channels are automatically selected and placed in memory depending on how your VCR is hooked up.
NS
* If you change your cable box or DSS receiver, please perform the "To Set or Reset Auto Clock Set" section above.
17
Q)
M
=
3
©
Y
mre
D
=
O
Q
Advertisement
