Advertisement
lf Cable Box
If you use a cable box,
tune it to channel 02.
If you use a DSS receiver,
tune it to channel 270.
PLEASE ie ee
CABLE
`
BOX TO €
.
If DSS Receiver
a
Push P to continue.
>
* "NOW TRANSMITTING"
(E)
appears.
PLEASE TUNE YOUR DSS
Y
RECEIVER
TO CH 270.
PROCEED: 9 KEY
END
:MENU KEY
If Cable Box
a
Push AY to select
©
"YES" or "NO," and
(ES > then push P to enter.
If you use a cable box
and selected "YES,"
go to step 9.
If you use a DSS receiver
and selected "YES," go to
the Alternate Instructions
on page 16.
SELECT:A Y KEY
If you selected "NO,"
lO
ue
the screen in step 6 on
-
page 14 will reappear.
Try entering a different code
assigned to your brand and/ or repositioning
the equipment (see page 13).
If the answer is still "NO," cable box or DSS
receiver control is not available.
Push MENU and go to the Alternate
Instructions on page 16.
IS YOUR CABLE BOX
RECEIVING CH 09 ?
NO
if DSS Receiver
S YOUR DSS RECEIVER
RECEIVING CH 200?
Confirm that
your cable box is on and
If the Auto Clock Set
displayed time is incorrect...
If you use a cable box and
receive more than one PBS
station, try auto clock set again.
Follow the Set or Reset Auto
Clock Set section on page 17
and when the instructions call for
you to enter a PBS station, enter
the one you have not tried yet.
If "AUTO CLOCK SET
INCOMPLETE" appears...
The screen below will appear
on-screen if auto clock set data
is not available in your area.
AUTO CLOCK SET
IS INCOMPLETE
PUSH MENU TO SET CLOCK
Push MENU to display the
manual clock set screen.
(See the Manual Clock Set
section on page 16.)
that your DSS
receiver is off.
Note:
a
Push AV to select
PES CHANNEL ON CABLE BOX
I JOU USE e el box ane
S
our local PBS channel
CH O!
receive more than one PBS
«GD»
y
,
station, you may exit the manual
=
number you receive on
teet iN KE
clock set screen and try auto
- your cable box, and
SET
clock set again.
Push CH A to start
Auto Clock Set.
CLOCK AUTO SET
* If you live near a different time
| CONNECT ANTENNA CABLE
zone, be sure to enter the PBS
'OUR
channel in your time zone.
* "AUTO CLOCK SET
PROCEEDING?" appears.
PLEASE PUSH CH UP KEY
` This display appears when
LOCAL PBS CH
THEN...
auto clock set is completed.
- Confirm that the time is
. correct and push CH A
7/25/1997 FRI 12:00PM
DST :ON
SETTING
: CHO2
AUTO CLOCK SET
Follow the Set or Reset Auto
Clock Set section on page 17 and
when the instructions call for you
to enter a PBS station, enter the
one you have not tried yet.
G)
M
=
=
(©
Y
pe
0)
m
D.
©.
to exit.
COMPLETED
END
: PUSH CH UP KEY
+ Auto clock set will be performed when the VCR is turned off the first time each day. If you use a cable
box and you want auto clock set to be performed, the cable box must be left on and tuned to the PBS
channel before the VCR power is turned off.
15
Advertisement
