Table of Contents
Advertisement
g sensor control
You can view information about the
energy and water consumption of
your washing machine with the
sensor.
See "Washing environmentally and
economically, Feedback" for more
information.
The following information will appear
in the display:
– An estimate of the energy and
water consumption before the
programme begins.
– The actual energy and water
consumption and the cost during
the programme or at the end of
the programme.
h sensor
You can specify the level of soiling of
the load in three settings. This
sensor is only active with the
TwinDos option activated.
i Start/Add laundry sensor control
The programme can be started
as soon as the sensor control
is flashing on and off. Touching
the Start/Add laundry sensor
control starts the selected
programme. The sensor control
lights up constantly.
Once the programme has been
started, the Start/Add laundry
sensor control allows you to
add laundry.
Operating the washing machine
j sensor
This sensor is used for activating
Cap dispensing.
k TwinDos sensor control with the
additional Whites and Colours
sensor controls
The TwinDos sensor control is used
for deactivating and activating
automatic detergent dispensing.
Depending on the colour mix of your
load, you can control the detergent
combination by selecting the Whites
or Colours sensor control.
Further information can be found in
"TwinDos".
l Optical interface
This is used by the Service
department as a transmission point.
m Programme selector
for selecting programmes and for
switching off the appliance. The
washing machine is switched on
when you select a programme, and
switched off by turning the
programme selector to the
position.
15
Advertisement
Table of Contents
