Table of Contents
Advertisement
ClEANINg AND prEvENTIvE mAINTENANCE
9 CLEANING AND PREVENTIVE MAINTENANCE
9.1 Daily
No daily cleaning is required, except in the case of accidental
glass breakage or a large amount of spillage in the bowl.
9.2 Weekly
Clean the bowl and the accessories with a cotton wool pad
dipped in 70% alcohol solution.
9.3 Monthly
Maintenance for drive shaft. You can wipe the drive shaft
with soft cloth, and then apply a thin coat of silicon grease.
All cleaning should
be performed with
the centrifuge discon-
nected from the power
outlet.
Never use metallic
implements to clean
the rotor or the inserts.
After cleaning the acces-
sories, always rinse them
with clean water and
dry.
Don´t clean the Lid
with alcohol to pre-
vent dolling
33
Advertisement
Table of Contents
Need help?
Do you have a question about the HumaMax Micro and is the answer not in the manual?