Setting Up The Channel List; Using Auto Setup; Control - Sony FD Trinitron WEGA KV-36XBR800 Operating Instructions Manual

Setting Up the Channel List
After you finish connecting your TV, you need to run Auto Setup to
set up your channels. The Auto Setup screen appears when you turn
on your TV for the first time after hooking it up. If you do not want to
set up the channels at this time, you can do it later by selecting the
Auto Program option in the Channel Menu (see page 68).
Using Auto Setup
1 Press POWERto turn on the TV.
2 Press TVtINC[10N on the remote control.
3 I_ continue running Auto Setup, press CH+. I_) exit Auto Setup,
press C}_.
Auto Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
1 Press POWFRto turn on the TV.
2 Hold down RES}Ton the remote control.
3 Press TVPOWERon the TV. (The TV will turn itself off, then back
on.)
4 Release RESFL