Sony FD Trinitron WEGA KV-36XBR800 Operating Instructions Manual page 84
Hide thumbs
Also See for FD Trinitron WEGA KV-36XBR800:
- Operation instructions manual (93 pages) ,
- Operating instructions manual (89 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Channels
Cannot receive upper
3
Change
the CaMe option to Off (see page 68).
channels
(UItF) when
-_
Use Auto Progrz_irin the Channel
Menu to add receivable
channels
that are
using an an}e_ a .............................. not presen!!yin
the TVis mem0rY (see page 68!: ...........................
TV is fixed to one channel
r3
Use Auto Program in the Channel
Menu to add receivable
channels
that are
not presently
in the TV's memory
(see page 68).
3
Check your Channel
Fix settings
(see page 68).
Cannot receive any
[2
Use Auto Programin the Channel
Menu to add receivable
channels
that are
channels
when using
not presently
in the TV's memory
(see page 68).
cable TV
3
Make sure the C_)bleoption is set to Or,'in the Channel
Menu (see page 68).
Cannot receive or select
3
Use Auto Program in the Channel
Menu to add receivable
TV channels
that
channels
are not presently
in TV memory
(see page 68).
General
How to reset TV to
3
Turn on the TV. While holding
down the RES[Tbutton
on the remote
factory settings
control, press the POWERbutton on the TM (The TV will turn itself off, then
back on again.) Release the RESETbutton.
How to restore Vide() settings 3
Press the RES[Tbutton on the remote control while in the Vide() Menu (see
to fad0ry
settings
....
page 64). ....................
How to restore Audio
3
Press the RES FTbutton on the remote control while in the Audio Menu (see
settings
to factory settings
page 66).
Cannot cycle through
the
3
Be sure the Vrteo Lz, bel option is not set to Skip (see page 75).
other video equipment
connected
to the TV
Cannot operate
Menu
3
If a menu option appears
in gray, this indicates
that the TV is in a state in
which the menu option is not available.
Lost password
3
In the password
screen (see page 70), enter the following
master password:
4357. The master password
clears your previous
password;
it cannot
be
used to temporarily
unblock channels.
TV makes "popping"
sound
_
This is a normal sound that results from the TV automatically
degaussing
when turned on
each time it is turned
on.
LED on front panel is lit
3
The STAND BY LED (see page 11) blinks when the TV is turned
on, then
shuts off when the picture is displayed.
If the LED blinks continuously,
this
may indicate
the TV needs service.
3
The TIMER LED (see page 11) indicates
that the timer is set (page 73).
When the timer is set, this LED will remain lit even when the TV is turned
off.
83
Advertisement
Table of Contents
