Dvd Player With Svideo And Audio Connectors - Sony FD Trinitron WEGA KV-36XBR800 Operating Instructions Manual
Hide thumbs
Also See for FD Trinitron WEGA KV-36XBR800:
- Operation instructions manual (93 pages) ,
- Operating instructions manual (89 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
DVD
Player
with
S VIDEO
andAudio
Connectors
Use this connection
if your
DVD player
does not have component
video
(Y, PB, PR) jacks.
To connect a DVD player with A/V connectors
1
Use an audio
cable
to connect
the DVD player's
audio
output
jacks
to the TV's audio
input
jacks.
2
Use an S VIDEO
cable to connect
the DVD player's
S VIDEO
jack
to the TV's S VIDEO
jack.
2
Audio cable
Notes on Using This Connection
Watch the DVD player
Press W/VIDEOrepeatedly
to select the DVD input (VIDEO i in the
illustration).
Set up the TV remote control
If you have a non-Sony
DVD player, you must program
the remote control.
to operate
the DVD player
See "Programming
the Remote Control"
on pages 43-44.
Activate the TV remote
Open the outside cover, as shown on page 42. Then set the A/V slide switch
control to operate
the DVD
to the position
you programmed
for the DVD player.
player
Control DVD functions
with
See "Operating
a DVD Player" on page 61.
the TV remote
control
Label video inputs to easily
See the instructions
for setting up Video Labels on pages 74-75.
identify equipment
connected
to the TV
Advertisement
Table of Contents
