Sony FD Trinitron WEGA KV-36XBR800 Operating Instructions Manual page 21

Cable Box Only For best results, use this coooection if:
Your cable company scrambles all channels, which requires you
to use a cable box.
You do not have a VCR. (If you have a VCR, see pages 22 and 24.)
Use the TV remote control to change channels coming through
the cable box to the TV's VHF/UHF jack. (You must first
program the remote control for your specific cable box.)
With this connection,all channelscomeinto the TVthrough your cablebox and only one
unscrambledsignal is sent to the TV,so you cannot usethe dual picture features.. If
someof your channelsare scrambled,but othersare not, considerusing the "Cable Box
and Cable" connectionon page 18 instead.
To conoect the cable box
1
2
Connect the CATV cable to the cable box's input jack.
Use a coaxial cable to connect the cable box's output jack to the
TV's VHF/UHF jack.
CAW Coa×ia cable
cane
1_ 2_/_1_ VHFHF
IN _ OUT
Notes on Using This Connection
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3 or 4)
and then use the cable box to switch channels.
Set up the TV remote control Program the remote control. See "Programming the Remote Control" on
to operate the cable box pages 43-44.
Activate the remote control to Press SAT/CABLE FUNCTION
operate the cable box
Prevent the accidental When using the cable box, you need the TV to stay on the channel the cable
switching of TV channels box is set to (usually channel 3 or 4). You can use the TV's Channel Fix
feature to lock in a specific channel. For details, see "Using the Channel
Menu" on page 68.