Dvd Player With Svideo And Audio Connectors - Sony FD Trinitron WEGA KV-32HS500 Operating Instructions Manual

DVD Player with
S VIDEO and Audio
Connectors
Use this connection if your DVD player does not have component
video (Y, PB, PR) jacks.
To connect a DVD player with A/V connectors
1 Use an audio cable to connect the DVD player's audio output
jacks to the TV's audio input jacks.
2 Use an S VIDEO cable to connect the DVD player's S VIDEO jack
to the TV's S VIDEO jack.
8 laDEC
_IDEO
SVIDEO
cane ,=_,
2
A_dio cable
/
kV_'JJI
Notes on Using This Connection
Watch the DVD player Press W/VIDEOrepeatedly to select the DVD input (VIDEO 1 in the
illustration).
Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control.
to operate the DVD player See "Programming the Remote Control" on pages 43-44.
Activate the TV remote Set the A/V slide switch to the position you programmed for the DVD
control to operate the DVD player. Then press VCR/DVD FUNCTION.
player
Control DVD functions with See "Operating a DVD Player" on page 59.
the TV remote control
Label video inputs to easily See the instructions for setting up Video Labels on pages 72-73.
identify equipment connected
to the TV