Dvd Player With S Video And Audio Connectors - Sony KV-36HS510 Installation And Disassembly Instructions Manual

DVD Player with
S VIDEO and Audio
Connectors
Use this connection if your DVD player does not have component
video (Y, I_, PR) jacks.
Toconnect a DVD
player
with A/V connectors
1 Use an audio cable to connect the DVD player's audio output
jacks to the TV's audio input jacks.
2 Use an S VIDEO cable to connect the DVD player's S VIDEO jack
to the TV's S VIDEO jack.
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
I numz
I
m
S VIDEO
cable
Audio cable
s_
W_O-
R--
_o, ___ _o
) I
Notes on UsingThisConnection
Watch the DVD player Press WNID[0 repeatedly to select the DVD input (VIDEO 1 in the
illustration).
Set up the TV remote control If you have a non-Sony DVD player, you must program the remote control.
to operate the DVD player See "programming the Rem0te Control" on pages 43-44. .........
Activate the TV remote Set the A/V slide switch to the position you programmed for the DVD
control to operate the DVD player. Then press VCRt0VO FUNCTION.
player
Control DVD functions with See "Operating a DVD Player" on page 61.
the TV remote control
Label video inputs to easily See the instructions for setting up Video Labels on pages 74-75.
identify equipment connected
to the TV
34