Klarstein CONTEMPO NEO 60 Manual page 36

EN
36
Replacing the lamp
• Switch off the extractor hood and disconnect it from the power supply by
pulling the power plug or turning off the fuse.
• Remove the grease filter.
• Remove the lamp by prying it from the hood housing (this may require
pressure or force).
• Unplug the lamp.
• Replace the lamp with a new one of the same type and ensure that you
connect the lamp to the light cable correctly.
• Turn the power back on by plugging in the power plug or turning on the fuse.
Max power
Voltage
Picture
Lamp cap
ILCOS D code
Self-ballasted LED modules
1,5 W
110 V – 240 V
Square/Diameter: 33.23 mm x 120 mm
/
DBS-1.5-
H-33.2/120