Table of Contents
Advertisement
Cancelincj
a cycle
*
Open
the door slightly
to stop the cycle.
•
Hold down the "START" button for approximately
3 seconds. The display
shows "O:O1".
•
Close the door.
•
The program
sequence
lasts approximately
1 min. Wait
until the display
shows "O:OO'.
•
Open
the door
•
Press the "POWER"
button.
•
Close the door.
You could be seriously
scalded
if you allow hot water
to splash out of the dishwasher.
OPEN THE DOOR
CAREFULLY during
any wash or rinse cycle. Do not fully
open the door until water
noises have stopped.
ADDITIONAL
FEATURES
Countdown
Display
The countdown
display
indicates the time remaining
for a
cycle to complete.
The time will change
based on water
temperatures
and control settings.
Chancjincj a cycle
•
Open the door slightly
to stop the cycle.
•
Before
opening
door all the way, wait a few seconds
for water
to drain to the base of dishwasher
tub.
•
Hold down the "START" button for approximately
3 seconds. The display
shows "O:O1".
•
Close the door.
•
The program
sequence lasts approximately
1 min. Wait
until the display
shows "O:OO'.
•
Open the door. Select new cycles and options.
•
Press the POWER button and close the door firmly.
INDICATOR
LIGHTS
Sanitized Indlcafer
When the "Sanitized"
symbol
illuminates on the control
panel,
it means that the items that were iust washed
have
been sanitized.
For more information on sanifization,
refer
to the Dishwasher
Cycles and Options
section of this manual.
(The indicator light will come on for the cycles marked
with
an asterisk in the cycles and options table).
Refill Rinse Agent
Indlcator
When the "Rinse Aid"
symbol illuminates
it means more rinse
agent is required.
Cycle Completlon
Sicjnal
The cycle completion
signal alerts
you when a cycle
completes
and the dishwasher
has washed
and dried the
dishes. You can choose to disable
the tone or adiust the
volume.
To activate
or deactivate:
•
Open
the door.
•
Turn the unit on by pressing
the "POWER"
button.
•
Hold down "CHINA
GENTLE" and press "START" until
the display
shows "H:OO"
•
Release both buttons.
•
Press "CHINA
GENTLE" until the display
shows "B:O2"
To increase or decrease
the tone:
•
Press "QUICK
RINSE" and adiust tone as needed.
•
Press "START" to save the setting.
Time Assist,
Turbo
Clean,
and
Dry Assist
To use any of these features:
•
Select the desired
cycle first.
•
Then press the appropriate
option
button i.e.
"Time Assist", "Turbo Clean" or "Dry Assist".
•
Close the door to begin the cycle.
Salt indicator
If this symbol
illuminates it means that the salt needs to
refilled.
SmartLicjht
Blue LED illuminates the floor to indicate that the dishwasher
is running.
NOTE: The default
factory
setting for the SmartLight
is
"active"
To change the setting:
•
Open the door.
•
Press the POWER button.
•
Hold down the "CHINA
GENTLE" button and press
START button until the display
shows "H:O'.
•
Release both buttons. The LED for button "CHINA
GENTLE" flashes and the digital
display
displays
the
factory
setting "H:O4".
•
Hold down the "CHINA
GENTLE" button until the display
shows "1:01".
•
By pressing
"QUICK
RINSE", you can switch between
"1:OO" (deactivate)
or "1:O1" (activate).
•
Press START to save the setting. Close the door.
16
Advertisement
Table of Contents
