Make sure to use a PCIe slot that is capable of supplying the required power and airflow to the ConnectX-6 cards as stated in
Uses the following PCIe interfaces:
PCI Express
(PCIe)
•
PCIe x8/x16 configurations:
PCIe Gen 3.0 (8GT/s) and Gen 4.0 (16GT/s) through an x8/x16 edge connector.
•
2x PCIe x16 configurations:
PCIe Gen 3.0/4.0 SERDES @ 8.0/16.0 GT/s through Edge Connector
PCIe Gen 3.0 SERDES @ 8.0GT/s through PCIe Auxiliary Connection Card
ConnectX-6 offers the highest throughput InfiniBand/Ethernet adapter, supporting HDR 200b/s InfiniBand and 200Gb/s Ethernet and enabling any standard networking,
200Gb/s
clustering, or storage to operate seamlessly over any converged network leveraging a consolidated software stack.
InfiniBand/
Qty.
1
35cm Cabline CA-II Plus harness (white)
1
35cm Cabline CA-II Plus harness (black)
2
Retention Clip for Cablline harness (optional accessory)
1
Adapter card short bracket
1
Adapter card tall bracket (shipped assembled on the card)
1
PCIe Auxiliary card short bracket
1
PCIe Auxiliary card tall bracket (shipped assembled on the card)