Table of Contents
Advertisement
Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This
supplemental feature only initiates when connected to another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.
c.
The non-operational storage temperature specifications apply to the product without its package.
MCX654105A-HCAT Specifications
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying the required power and airflow as stated in the below
table.
Physical
Protocol Support
Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Auxiliary PCIe Connection Card Size: 5.09 in. x 2.32 in. (129.30mm x 59.00mm)
Two Cabline CA-II Plus harnesses (white and black) Length: 35cm
Connector: Single QSFP56 InfiniBand and Ethernet (copper and optical)
a
InfiniBand: IBTA v1.4
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per
lane), EDR (25Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane), HDR (50Gb/s per lane) port
Ethernet: 200GBASE-CR4, 200GBASE-KR4, 200GBASE-SR4, 100GBASE-CR4, 100GBASE-CR2, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4,
40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4,
10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX, 1000BASE-KX, 10GBASE-SR
Data Rate
Gen3: SERDES @ 8.0GT/s/, x16 lanes (2.0 and 1.1 compatible)
InfiniBand
Ethernet
SDR/DDR/QDR/FDR/EDR/HDR100/HDR
1/10/25/40/50/100/200 Gb/s
123
Advertisement
Table of Contents
Troubleshooting
