Table of Contents
Advertisement
Notes: a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This
supplemental feature only initiates when connected to another NVIDIA InfiniBand product.
b. Typical power for ATIS traffic load.
c.
The non-operational storage temperature specifications apply to the product without its package.
MCX683105AN-HDAT Specifications
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying the required power and airflow as stated in the below
table.
Physical
Protocol Support
Adapter Card Power
RoHS: RoHS Compliant
Adapter Card Size: 5.59 in. x 2.71 in. (142mm x 68.90mm)
Connector: Single QSFP InfiniBand (copper and optical)
a
InfiniBand: IBTA v1.4
HDR (4 lanes x 50Gb/s per lane) , HDR100 (2 lane x 50Gb/s per lane), EDR (4 lanes x 25Gb/s per lane), FDR (4 lanes x 14.0625Gb/s), 1X/2X/4X SDR (4 lanes
x 2.5Gb/s per lane).
Data Rate
Gen3/4: SERDES @ 8.0GT/s/16GT/s, x16 lanes
Voltage: 12V, 3.3VAUX
Power
b
Typical Power
InfiniBand
Passive Cables
HDR/HDR100/EDR/FDR/SDR
Cable
19.58W
134
Advertisement
Table of Contents
Troubleshooting
