Table of Contents
Advertisement
MCX653106A-EFAT Specifications
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of supplying the required power and airflow as stated in the below
table.
For power specifications when using a single-port configuration, please refer to
Physical
Protocol Support
Adapter Card Size: 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Connector: Dual QSFP56 InfiniBand and Ethernet (copper and optical)
a
InfiniBand: IBTA v1.4
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR (10Gb/s per lane), FDR10 (10.3125Gb/s per lane), FDR (14.0625Gb/s per
lane), EDR (25Gb/s per lane) port, HDR100 (2 lane x 50Gb/s per lane) port
Ethernet: 100GBASE-CR4, 100GBASE-CR2, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2, 50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-
LR4, 40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-ER, 10GBASE-CX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-CX,
1000BASE-KX, 10GBASE-SR
Data Rate
Gen3/4: SERDES @ 8.0GT/s/16GT/s, x16 lanes, Socket Direct (2.0 and 1.1 compatible)
MCX653105A-EFAT
InfiniBand
Ethernet
Specifications.
SDR/DDR/QDR/FDR/EDR, HDR100
1/10/25/40/50/100 Gb/s
132
Advertisement
Table of Contents
Troubleshooting
