Download Print this page

VISICO LED-200SA User Manual

Download this manual

LED-200SA

USER GUIDE

Need help?

Do you have a question about the LED-200SA and is the answer not in the manual?

Page 1 LED-200SA USER GUIDE...
Page 2 1/ Safety Notes A ﬁre hazard exists if ﬂammable materials are placed in close when the unit is in use. Do not restrict air vents while in use. Avoid placing AC adapter where they can be tripped over. Use only the original AC adapter to prevent damage to the LED light Protect from heavy, sharp object or hot object, which may cause damage.
Page 3 Please push the latch knob back towards the rear of the unit and rotate the protective cap anti clockwise. Put black plastic cap aside. (Fig.1) Install standard reﬂector where the protective cap was before. Align the three pegs on the reﬂector with the three slots, press the reﬂector in and rotate clockwise until it locks in place.
Page 4 LED power. CCT regulator:Set color temperature. Rotating Regulator clockwise, color temperature changes from 2700K-6500K. Rotating Regulator anticlockwise, color temperature changes from 6500K-2700K. 8/ Speciﬁcations Model No. LED-200SA Power Output 200w Illuminance （Lux/m） 8200lux/m (bare lamp) @ color temperature 4500k Illuminance （Lux/m）...
Page 5 9/ VISICO LIGHT APP CONTROL Apple mobile phone users scan the QR code Android phone users scan the QR below to download the "VISICO LIGHT”APP code below and use a browser to from the Apple App Store (supports IOS open and download the "VISICO version 9.0 or higher)