ROOMS TO GO MIYO 92321-2 Assembly Instructions

MIYO 92321-2 END TABLE SKU# 23009233
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed
staple tips can cause injury, therefore, for your protection, please remove any exposed staple used in
packing.
1. We recommend that you should assemble this product with the assistance of another person;
this will make assembly easier, and will help to eliminate damage to the product or injury to persons during
assembly.
2. Be sure to check all packing materials carefully for small parts that may have come loose inside the carton
during shipment.
3. Please do not over tighten screws or bolts.
4. Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your
newly purchased product correctly and efficiently.

STEP 1

Place the Table Top (1) bottom side up carefully. Secure Table Leg (2) to the Table Top (1) with Allen
Bolt, Spring Washer and Flat Washer (A) using Allen Key (B) , do not tighten all bolts at this time.
2
This product is manufactured by MIYO for
ASSEMBLY INSTRUCTIONS

HARDWARE LISTS

NO. OUTLOOK
Allen Bolt
5/16" x 18 x 2-1/2''
Spring Washer
A
5/16"
Flat washer
5/16" x 19mm x 2mm
Allen Wrench
B
4mm
SIZE
Q'TY
10PCS
10PCS
10PCS
1PC
HARDWARE PACK LOCATION (1)
92321-2 END TABLE
2
B
1

PART LISTS

SKETCH
NO. DESCRIPTION
TABLE TOP
1
2 TABLE LEG
3
SHELF
SKU#23009233
A
Page 1 of 2
Q'TY
1PC
2PCS
1PC