Subscribe to Our Youtube Channel
Related Manuals for ROOMS TO GO 18565703
Summary of Contents for ROOMS TO GO 18565703
- Page 1 SETUP AND OPERATION GUIDE TRIPLE PWR RECLINER SKU: 18565703/ 18565715/ 18565727 Vendor Code: MVLC...
- Page 2 TABLE OF CONTENTS Important Safety Instructions Assembly of Your Lift Chair or Recliner Chair Assembly Cord and Transformer Connections Hidden Cup Holders with Wireless Charging Operating Instructions For Triple Power Sku’s Installation of Back-up Batteries Troubleshooting Note: When placing the furniture on non-carpeted flooring, it is recommended to use some type of floor protection such as an area rug or furniture pads under the chair glides.
- Page 3 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING. WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons: DANGER: To reduce the risk of electric shock-Always unplug this furnishing from the electrical outlet before cleaning. Unplug from outlet before putting on or taking off parts. Close supervision is necessary when used by or near children, or disabled people.
- Page 4 CHAIR ASSEMBLY ATTACHING THE CHAIR BACK TO THE CHAIR BASE Figure A Figure C Back Receivers Steel Mechanism Lumbar Post Headrest Figure B Screwdriver required (not included) CAUTION: PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING ASSEMBLY PROCESS. IT IS RECOMMENDED TO USE TWO PEOPLE WHEN ASSEMBLING AND REMOVING THE INSIDE BACKS TO AND FROM THE BASE OF THE FURNITURE.
- Page 5 CORD AND TRANSFORMER CONNECTIONS Once the box has been removed from around the chair, you’ll notice the back is laying on top of the seat. There are a couple items to remove from the seat portion of the chair first. Follow the steps below: Remove the zip tie holding the foam bag with the Power Transformer and its cord on the left.
- Page 6 Hidden Cup Holders with Wireless Charging Charging your Smartphone on the Wireless Charger Open the front of the arm to use the hidden cup holders. WARNING! Your smartphone may shift or fall out of the charger when the chair is raised. Remove your smartphone from the wireless charger prior to elevating your chair above a seated position.
- Page 7 INSTALLATION OF BACK-UP BATTERIES 2 - 9 Volt back-up batteries will lift the chair from the reclined position to the seating position one cycle in case of a power failure. If a power failure occurs and the chair is cycled, the 2 - 9 Volts batteries will need to be replaced.
- Page 8 Customer Service If you have any questions regarding the use of this unit,or find that your unit needs service, please contact your retailer. • NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, by the party responsible for compliance could void user's authority to operate the equipment.
Need help?
Do you have a question about the 18565703 and is the answer not in the manual?
Questions and answers
Wireless charging not charging
The wireless charging on ROOMS TO GO part number 18565703 may not be working due to the smartphone shifting or falling out of the charger when the chair is raised. Additionally, there may be a power issue, such as a power failure or depleted backup batteries. Ensure the chair is in a stable position and check the power supply.
This answer is automatically generated
We've had our wonderful chair, 18565703, for a month or 2 and it has been wobbly right to left from the start. I'm concerned that over time this will limit the life of the chair. Why is it wobbly? Was it set up wrong by the delivery team. It's the Morgan Hill triple power lift recliner bought by our son, Tim Adams. His name might be in your files. Let me know if you need more information.
The wobbly condition of the ROOMS TO GO Morgan Hill triple power lift recliner (part number 18565703) could be due to improper assembly. The setup guide recommends sliding the back receivers onto the steel mechanism posts firmly until they lock into place. If the back is not securely locked, it may cause instability. Additionally, if the chair is placed on a non-carpeted floor without furniture pads or an area rug, it may shift or feel unsteady. Checking that all connections, including the transformer and power supply, are secure can also help ensure proper operation. If the issue persists, confirming that the delivery team followed the correct assembly steps is advisable.
This answer is automatically generated
The chair is stuck in the raised position. Tested the motors and they seem to be operational. Thinking it is the remote. Where can I get a replacement?
You should contact your retailer for service or replacement parts for the ROOMS TO GO chair, part number 18565703.
This answer is automatically generated
How to place phone on charger to charge. Which side is up. What do blinking red lights on charger mean?