Adding And Erasing Ctrannds Manually; Changing &Annals - Toshiba COLORSTRAM 26HL84 Owner's Manual

Adding and erasing channels manually
Af'rer you laave attto111aticaJlyprogrammed the active cllannels into the
TV's cllannel memory, you can mammlly add or erase specific
cLannels.
To add or erase channels:
1. Select the cLannel you want to add or eiase. If you are adding a
channel, you must select the channel using the Channel Nttmber
DuttOl_lS.
2. Press MENU, and then press @ or _ until the SET UP men_t
appears.
3. Press A or V to highlight ADD/ERASE.
SET UP
LANGUAGE ENGL I SH
ANT1/2 ANT1
TV / CABLE CABLE
GRAY LEVEL 1_
BACK LIGHTING
4. Press @ or _ to select ADD or ERASE, depending on the
f:_mction you want to perf'orm.
5. Repeat steps 1-4 f'or other channels yott want to add or erase.
Changing channels
To change to tl_e next programmed channeh
Press Channel A or Y on tile TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9 and 100).
For channels 100 and higher, press the 100 bt_tton, and then the
next two nttmbers. For example, to select cilannel 125, press
100, 2, 5.
Changing channels using SpeedSurf
To change to a specific programmed claannel using SpeedSurf:
Press and hold Channel A or Y f'or about one second. TLe TV
will enter the SpeedSurfmode.
MENU
TV control panel
Channel VA
Channel
Number
MENU
Upper channels
I"
-- Current channel
,L
Lower channels
Channel label (if set)
Repeatedly press or laold Channel A or Y while the SpeedSurF
mode is on-screen to scroll the channel list. Release the b_ttton to
display the llighlighted cLannel.
3{}