Ebyte E52-400/900NW22S User Manual page 18

Chengdu Ebyte Electronic Technology Co.,Ltd..
AT+MEMBER_RAD=<rad>,<save>
AT+NONMEMBER_RAD=<rad>,<save>
AT+CSMA_RNG=<rng>
AT+ROUTER_SCORE=<score>
AT+HEAD=<enable>
AT+SECURITY=<enable>
AT+RESET_AUX=<enable>
AT+RESET_TIME=<reset_time>
AT+FILTER_TIME=<time>
AT+ACK_TIME=<time>
AT+ROUTER_TIME=<time>
AT+GROUP_ADD=<gruop>
AT+GROUP_DEL=<gruop>
AT+GROUP_CLR=<enable>
AT+ROUTER_CLR=<enable>
Set module multicast
member radius
Set module multicast
non-member radius
Set CSMA random
avoidance time
Set the maximum
number of consecutive
routing failures
Set the extra frame
header function enable
switch
Set the data encryption
function enable switch
Set auto-reset LED2
change switch
Set automatic reset time
Set broadcast filter
timeout
Set request response
timeout
Set routing request
timeout
Add GROUP
information
Delete GROUP
information
Delete GROUP
information table
Clear routing table
information
14
CopyriCopyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd.
E52-400/900NW22S User Manual
For multicast use, it is recommended to
keep the default
<rad>: multicast member radius (0 ~ 15)
<save>: whether to save to Flash
For multicast use, it is recommended to
keep the default
<rad>: Multicast non-member radius (0 ~
15)
<save>: whether to save to Flas
it is recommended to keep the default
Random avoidance time range (20 ~ 65535)
ms
<score>: The maximum number of
consecutive route failures,
Routes need to be re-established after
exceeding
<enable>: Whether the extra frame header
function is enabled
<enable>: Whether the data encryption
function is enabled
<enable>: Automatic reset LED2 change
enable
<reset_time>: automatic reset interval time
(min)
it is recommended to keep the default
<time>: Broadcast filter timeout (3000 ~
65535 ms)
it is recommended to keep the default
<time>: Request response timeout (1000 ~
65535 ms)
it is recommended to keep the default
<time>: Routing request timeout (1000 ~
65535 ms)
<group>: Add multicast group address, up
to 8 can be added
<group>: Delete multicast group address
<enable>: 1: Delete the entire GROUP
information table
<enable>: 1: Delete the entire routing
information table